Manufacturer/Supplier to the Pyrotechnic Community
Sequencer+
Master
The Sequencer+ Master is housed in a 8.7" X 7.45"
X 3.9" rugged, waterproof polypropylene enclosure. It
contains a microcontroller and an LCD for user interface. It
uses an internal 9 volts for power. All controls and connectors
are located on the top panel. Two XLR style connectors -
one for output to the Sequencer+ Slave and the other for
optional accessories. An 'ON/OFF' power switch with LED.
The LCD for user interface, two programming/selector pushbutton
switches labeled 'YES' and 'NO', and pushbutton 'RUN' and 'STOP'
switches. Programming can be quickly and easily learned.
The Sequencer+ Master will
electrically do slave testing as well as cue testing. After
programming the time interval desired, you may select to fire
manually or automatic (straight or alternate). During firing,
the LCD will indicate which slave and cue is presently firing.
The 'STOP' switch may be pressed to halt firing - pressing
the 'RUN' switch will resume firing - where it left off.
*View Instruction manual (65kB PDF)*